English
On the ground | Between the knees or thighs | Starting |
219BA036 KN
NPlace the chain saw securely on the ground – assume a steady stance – the saw chain must not touch any objects and also must not touch the ground
NWith the left hand on handlebar, press the chain saw firmly against the ground – thumb wrapped around the handlebar
NPlace your right foot through the rear handle
219BA037 KN
Nclamp the rear handle between the knees or thighs
Ngrip the handlebar firmly with the left hand – thumb wrapped around the handlebar
219BA038 KN
Nwith the right hand, pull the starter grip slowly until you feel it engage – and then give it a brisk strong pull – simultaneously press down on the handlebar – do not pull the starter rope out all the way – risk of breakage! Do not let the starter grip snap back – guide it vertically back into the housing so that the starter rope can rewind properly
With a new engine or after a long period of disuse or if the fuel tank has run empty (engine stalled out), with machines without an additional manual fuel pump, it may be necessary to pull the starter rope several times - to prime the fuel line.
MS 441 | 33 |