General Information
1-2 Firs t Edition 96047
■Feature Codes
The UPS is an optional feature available from StorageTek. Table 1-1 lists the
library, feature code, and conversion bill number for the UPS:
Note: The UPS feature requires the optional rack cooling feature. See
Chapter 3 for information about the prerequisites.
■Installation
StorageTek service representatives can install the UPS feature in the libraries.
The UPS bundle is drop-shipped by APC (the manufacturer) within 24 hours of
the receipt of the order.
Use the information in the L180/L700 Tape Library Ordering and Configuration
Guide (part number MT9112) to order the library and the desired features
including the UPS.
See Chapter 3 for an overview of the installation instructions.
■Service
If there is a problem, place a service call to StorageTek’s Call Center. If it is
determined that the UPS has failed; the call will be escalated by the Call Center
and StorageTek’s Technical Support to APC, who has 7 by 24 coverage. The
replacement parts will be sent to the cus tomer site.
Notes:
•See Chapter 4 for information about how to isolate problems with the UPS.
•See Chapter 5 for the procedure to place a service call.
Table 1-1. Feature Codes
Library Feature
Code
Description Conversion
Bill
L180 RPWR Domestic power switch and UPS 101406
EPWR International power switch and UPS 101407
L700 RPWR Domestic power switch and UPS 101410
EPWR International power switch and UPS 101411