Stow 8FP manual Frame, General

	SPECIFICATIONS
Specifications
FRAME
STRUCTURE	Unitized, Welded Steel Plate
DRIVE REDUCTION SYSTEM	3VX335 Belt/Pulley
DRIVESHAFT SIZE AND CONFIGURATION	13/16-inch (21 mm) hexagon
MAXIMUM CUTTING DEPTH	5/8-inch (16 mm)
MAXIMUM CUTTING WIDTH	8-inches (203 mm)
MAXIMUM MACHINE LENGTH	43-1/4-inches (1099 mm)
MAXIMUM OPERATOR HANDLE HEIGHT	38-3/8-inches (975 mm)
OVERALL MACHINE WIDTH	16-1/8-inches (410 mm)
CUTTING PROXIMITY TO LATERAL BORDER	3-1/4-inches (83 mm) without edger attachment
VACUUM CLEANER CONNECTION	1-1/2 or 3-inch (38 or 76 mm) outside diameter.
GENERAL
8FP/E BASIC WEIGHT	155 lbs (71 kg), less drum and flails.
8FP/G BASIC WEIGHT	160 lbs (73 kg), less drum and flails.
MAXIMUM GOVERNED ENGINE	3450 RPM
SPEED FOR 5 HP CATEGORY,
4 CYCLE, HONDA GX160 GASOLINE ENGINE

8FP/E ELECTRIC MOTOR 5.0 Hp, 3450 RPM, 21 amperes full load @ 230 VAC, 60 Hz, 23 amperes full load

@220 VAC, 50 Hz or The electric motor requires a clean (no other electric products on the same circuit) capacity

10 ampere capacity circuit to properly function at 230 VAC, 60 Hz.

8FP FLOOR PLANER SERIES OPERATION AND PARTS MANUAL REV #1 (10/27/06) PAGE 47