STOW CUTTER 1 CE SAW— RAISE/LOWER AND DEPTH STOP
Raise/Lower and Depth Stop
The saw is equipped with a Raise/Lower and Depth Stop Assembly that is supported by the following components. (Figure 13)
1.Adjusting Hand Crank Assembly
2.Raise/Lower Acme Screw
3.JackArm
4.Wheel Base Assembly
5.Jackshaft Pin
6.Lock Positions
Setting the Depth Stop
1.Lift the Adjusting Hand Crank to unlock (disengage) the Depth Stop.
2.Rotate the crank to raise or lower the blade to the desired depth.
3.Lower the crank into one of the lock position holes (Item 6).
| Unlocked |
|
| Position |
|
Locked |
|
|
Position | 1 | 6 |
| 6 |
|
| 2 |
|
3
5
4
Figure 13. Cutting Depth - Raise/Lower System
PAGE 20 — STOW CUTTER 1 CE — OPERATION MANUAL — REV. #2 (12/20/07)
