Manuals / Stow / Lawn and Garden / Portable Generator

Stow manual Stow G-4.5R Initial START-UP ENGINE/OPERATION

Models: G-4.5R

1 76
Download 76 pages 48 Kb
Page 28
Image 28

STOW G-4.5R — INITIAL START-UP ENGINE/OPERATION

6.If the engine has started, slowly return the choke lever (Figure 12 ) to the “OPEN” position. If the engine has not started repeat steps 1 through 6.

7.Beforethegeneratorisplacedintooperation,runtheengine for 3-5 minutes. Check for abnormal smells, fuel leaks, and

noises that would associate with lose components.

Figure 17. AC Voltmeter (120VAC)

8.Place the idle control switch (Figure 15) in the "OFF" (down) position. This will allow the engine run at speed about 3600 RPM's

Figure 15. Idle Control Switch (Down)

Placing the idle control switch in the down position allows the

NOTE engine to operate at a maximum speed of about 3600 RPM's. When the idle control switch is place in the up position (ON), the generator

will run at idle speed (2200 RPM's) until a load is applied, at that time the engine speed will increase to 3600 RPM's as long as the load is being applied. When the load is not in use, the engine speed will drop back to the idle mode after about 3 seconds.

9.Place the full power switch (Figure 16) in the "120V" (Up) position.

Figure 16. Full Power Switch (Up)

10.Refer to the AC voltmeter (Figure 17) on the control box. The voltage indicated on the voltmeter should be 120 VAC with no load applied.

11.If desired, verify with a voltmeter (Figure18) that 120 VAC is present at the GFCI receptacle and the twis- lock receptacles as shown below.

Figure 18. 120 VAC Receptacles

The 240V receptacle on either

unit is not operational (no voltage)

NOTEwhen the full power switch is in the 120V position.This receptacle is active (voltage) only when the full power switch is in the 240V position.

12.Place the full power switch (Figure 19) in the "240/ 120V" (Down) position.

Figure 19. Full Power Switch (Down)

PAGE 28 — STOW G-4.5R A.C. GENERATOR— OPERATION & PARTS MANUAL — REV. #3 (03/13/06)

Page 27 Page 29
Page 28
Image 28
Stow manual Stow G-4.5R Initial START-UP ENGINE/OPERATION, Noises that would associate with lose components
Page 27 Page 29

G-4.5R specifications

The Stow G-4.5R is an exceptional piece of rugged engineering designed for professionals who require efficiency and reliability in demanding environments. This cutting-edge equipment stands out for its unique combination of robust features and innovative technologies.

At the heart of the G-4.5R is its powerful engine, designed to facilitate high-performance operations. The machine is equipped with a fuel-efficient powertrain that not only maximizes output but also minimizes consumption. This feature is crucial for users who need to operate over extended periods without frequent refueling, making the G-4.5R highly suitable for long-term projects.

The G-4.5R boasts an advanced hydraulic system that enhances its lifting capabilities. With optimized hydraulic mechanics, the machine can handle heavier loads with improved precision and speed. This ensures that users can perform tasks more efficiently, reducing downtime and increasing productivity. Furthermore, the hydraulic system is complemented by a robust frame, designed to withstand rigorous field conditions while providing stability during operation.

Another notable aspect of the Stow G-4.5R is its user-centric design. The operational interface is intuitively laid out, allowing users to easily navigate controls and features without extensive training. The ergonomic design of the operating cabin further enhances comfort, reducing fatigue during long working hours. Noise reduction technologies have also been integrated into the design, making the working environment more pleasant.

In terms of technology, the G-4.5R features real-time monitoring systems that provide crucial operational data. These systems allow users to track fuel levels, hydraulic pressures, and performance metrics at a glance. Such capabilities not only promote efficient resource management but also facilitate preventive maintenance, helping to prolong the machine’s lifespan.

Safety is paramount in the design of the G-4.5R, with multiple safety mechanisms in place. These include automatic shutdown features in case of system overloads, reinforced caging to protect operators, and enhanced visibility systems that ensure a clear line of sight during operation.

In summary, the Stow G-4.5R is a versatile, powerful, and user-friendly machine specifically designed for challenging work environments. With its combination of advanced technologies, ergonomic design, and safety features, the G-4.5R stands out as a top choice for professionals aiming for efficiency and reliability in their operations.