MOVE THE SPOT SIZE CONTROL HANDLE on the large lens carriage to the forwardmost position to project the smallest spot possible with the iris, choppers, and dimming controls in their full open positions. Project the spot to a wall or similar flat perpendicular surface opposite the spotlight.

TURN THE CENTER FOCUS CONTROL counterclockwise until a small black spot is pro- jected on the wall. It may be well to run this adjustment both directions to permit positive identification of the dark spot.

LOOSEN THE TWO THUMB SCREWS to the left and right of the focus control just enough to permit manual movement of complete control assembly. Move the control assembly around the two thumb screws and observe the smooth dark shadow of the bulb electrode inside the shaded circle of the reflector center opening. The shadow of the electrode must be centered in the projected opening of the reflector.

MOVE THE CONTROL ASSEMBLY around the thumb screws until the dark electrode shadow is as round as possible to project. It may be necessary to again rotate the focus control to define the electrode shadow.

AFTER THE ELECTRODE SHADOW is as even around the outside as possible, tighten the two thumb screws to lock this adjustment in place, and rotate the focus control to obtain the brightest light with the best light distribution. Turn the spot focus control knob, located on the front of the lens mechanism, to sharpen the edge of the spot.

THE SECOND METHOD of aligning the xenon bulb is to project the spot to the stage, and using the bulb adjustment controls, obtain a “hot spot” in the projected spot. Center this “hot spot” in the projected spot by moving the entire control section around the two thumb screws. Once the “hot spot” is centered in the projected spot, lock the adjustment control in position with the two thumb screws and rotate the focus control to obtain a spot with an even distribution of light. Turn the spot focus control knob at the front of the lens mechanism to sharpen the edge of the spot.

THIS ADJUSTMENT should not be disturbed until the xenon bulb is rotated or replaced. At this time it will be necessary to repeat the alignment procedure.

REPLACE THE REAR COVER PANEL over the bulb adjustment control mechanism. Secure using the plastic fasteners.

BECAUSE OF MANUFACTURING TOLERANCES and normal bulb aging, it may be nec- essary to operate one lamp at slightly higher or lower current than others to obtain equal light balance between two or more spotlights. These adjustments are made at the xenon power supply.

TO EXTINGUISH THE ARC, place the LAMP switch in the OFF position. The blower in the lamphouse will continue running until the xenon power supply is de-energized. Allow the blower to operate and cool the bulb for at least five minutes after extinguishing.

Page 10 Page 12
Page 11
Image 11
Strong Enterprises 48057 manual
Page 10 Page 12

48057 specifications

Strong Enterprises 48057 is a cutting-edge organization that integrates state-of-the-art technologies and innovative practices to deliver exceptional solutions across various industries. With a focus on enhancing productivity and efficiency, Strong Enterprises offers a diverse range of products and services designed to meet the evolving needs of its clients.

One of the main features of Strong Enterprises is its commitment to research and development. This dedication allows the organization to stay ahead of industry trends and harness the latest technological advancements. The company invests significantly in exploring emerging technologies such as artificial intelligence, machine learning, and the Internet of Things (IoT), enabling it to provide smart solutions that optimize operations and streamline processes.

Strong Enterprises is renowned for its robust software development capabilities. The company offers custom software solutions that are tailored to the specific requirements of its clients. By employing agile methodologies, Strong Enterprises ensures that projects are delivered on time and within budget while maintaining flexibility to adapt to changing client needs. The company’s development team is proficient in various programming languages and frameworks, allowing them to create scalable and secure applications.

In addition to software development, Strong Enterprises provides comprehensive consulting services. The organization’s team of experts works closely with clients to assess their operational needs and identify areas for improvement. By leveraging data analytics and strategic planning, Strong Enterprises helps businesses implement effective solutions that drive growth and enhance decision-making processes.

Strong Enterprises also emphasizes sustainability and environmental responsibility in its operations. The company actively seeks out eco-friendly practices and solutions, ensuring that its technologies contribute to a more sustainable future. This commitment not only aligns with global efforts to combat climate change but also resonates with clients who value environmental stewardship.

Collaboration and communication are integral to Strong Enterprises’ operational philosophy. The organization fosters a culture of teamwork, encouraging cross-functional collaboration among its employees. This not only enhances innovation but also ensures that clients receive well-rounded solutions that address all aspects of their challenges.

In conclusion, Strong Enterprises 48057 stands out as a leader in technological innovation and service excellence. With its focus on research and development, custom software solutions, consulting services, sustainability, and collaboration, Strong Enterprises is well-equipped to meet the dynamic demands of its clients and drive success in the ever-evolving business landscape.
Top Page Image Contents