Omega RD200 Memory Clear,    ,   , Initialization items, Operation Flow Chart

20. MEMORY CLEAR

This is for initializing parameters and correction data to the default values.

1

Initialization items

Items	Clear function details and cautions
Parameters	Initializes all parameters excluding [time] to the default values.
	Refer to Section 7.3 (List of programming items) for the default values.
Correction data	Initializes all correction data to the default values.
	The time is preprogrammed to Japanese time at shipment. When initializing the time, it
Clock	becomes 00:00 hours on January 1, 2000. If the operation screen is not shown due to a
	failure of the LSI for time, clear the programmed time.

2 Operation Flow Chart

<Example> Initializing parameters

Operation screen DISP

2 sec.

or more

								6	）
				（ SHIFT ＋ A～Z
[Engineering mode selection]						3 sec. or more			Ref.1
		  
	Cursor
			Memory
			clearance	°		°		→ ENTRY
					F		C
[Selecting initialization]
		  
	Cursor
					ENTRY				Ref.2
[Displaying items]
	   
	Cursor
		(1)		(2)		(3)
[Selecting item]					°F		°C
	   
	Cursor
[Executing initialization]					ENTRY				Ref.3

  

Reference 1 Engineering mode types

: Memory clear

: Adjustment

: Hardware check

Reference 2 Initialization items

(1): Parameters

(2): Correction data

(3): Clock

Reference 3 Initialization

Press ENTRY to initialize the selected item. After initialization, the screen returns to the [Displaying items] screen.

－１１８－