Omega RD2800, RD200 manual Printings, Printing Types and the Details

9. PRINTINGS

9.1 Printing Types and the Details

Printing comprises trace printing and digital printing. The fixed-time printing and trace printing are executed even if any operation is not programmed.

1

Printing Types and the Details

Printing type

Trace printing (Cartridge pen)

	Fixed-time
	printing
	Periodic
	data printing
	Digital data
	printing
	List 1
	printing
	List 2
pen)	printing
	List 3
(Plotter	printing
	Message
Printing	printing
	Alarm
Data	printing
	sync. mark
Digital
	Time axis
	printing
	Power-on
	printing
	Operation
	printing line
	and
	Operation
	printing No.
	Printer
	check
	printing

		Printing details			Remarks
Trend printing is executed for each pen (channel)
	1st pen	2nd pen	3rd pen	4th pen	⎯
	Red	Green	Blue	Brown
The following details are printed on the fixed time.					10-1
(1) Year/Month/Day (2) Time (3) Time line (4) Chart speed (5) Scale, Engineering unit, Tag
Measured values are printed on the trace printing with programmed intervals. The					11-7
printing starts from the programmed start time line. The printing mode is different
depending on chart speed.
Measured values are printed on the trace printing. The printing mode is different					9-2
depending on chart speed.
Major parameters (Range/Printing range, Scale, Subtract printing, Periodic data					9-3
printing) are printed as a table.
The parameters (such as time axis synchronizing, message, items relating to					9-3
options) other than those involved in List 1 are printed as a table.
All parameters (List 1 + List 2) are printed as a table.					9-3
Message is printed		on the right	side of the	chart paper by selecting the	9-4
programmed message No.
Alarm details (time, alarm points, alarm type) are printed on the right side of the					10-4
chart paper when an alarm activates or an alarm is reset.
(1) When the time axis synchronization (POC) is switched on or off, its time, mark					9-6
(*), and ON or OFF are printed on the right side of the chart paper.
(2) When it is ON, a mark (*) is printed to the right of the time print of fixed-time					10-1
printing.
Year/Month/Day and time are printed on the left side of the chart paper when the					6-1
power is turned on.
For the remote contacts (option), it is required to program the "Operation printing
position" and select one of Act 1 to 4 in the "Remote contacts" programming.
(1) Printing line: When a contact signal (on) is applied to the allocated terminal,					13-4
the line is printed by 5 mm to the right of the programmed printing line
position.

(2)Operation printing No.: Operation printing No. (A to D) is printed at constant intervals to the left of the programmed printing line position.

When hardware check is executed by selecting the printer (plotter pen)	19-2
characters are printed for checking purpose.

－４５－