6.BASIC OPERATION

6.5 Switching Operation Screen (RD2800)

For RD2800, two operation screens, (1) measured value screen and (2) alarm activation screen, are available. Each time DISP is pressed, the screen switches. Bargraphs for analog indications are displayed in any of these screens.

Measured value screen

DISP

DISP

 

Alarm activation

 

screen

(Note) The alarm activation screen is only available when an alarm activates (shown by dotted lines). When no alarm activates, the measured value screen only appears even if DISP is pressed.

1Measured value screen

The screen below is for 4-pen type. 1-pen type - measured value is displayed in CH 1. 2-pen type - measured values are displayed in CH 1 and CH 2. 3-pen type - measured values are displayed in CH 1 to CH 3.

 

Ch 1

 

Ch 2

 

 

 

Ch 4

 

Time

 

Chart speed

 

 

 

 

Ch 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Alarm activation screen

This screen is only available when an alarm activates.

Explanation for the display

In each channel, the alarm level 1, 2, 3 and 4 are allocated to the digits from the left end. The alarm type shall be displayed only at the digit where an alarm activates.

For alarm types, see Section 11.5, item 1 .

Alarm type at level 1 Alarm type at level 2 Alarm type at level 3 Alarm type at level 4

-31-

Page 35
Image 35
Omega RD2800, RD200 manual Time, This screen is only available when an alarm activates, Chart speed