13. REMOTE CONTACTS
13.1 Remote Contacts Function
This explanation is only for the remote contacts (option).
1 Remote Contacts
(1)The following functions are available with the contact signals at remote contacts terminals (EX1 to 4). However, the functions are limited due to four terminals (EX1 to 4) provided. Moreover, some functions are automatically allocated to a certain terminal Nos.
(2)Programming to allocate the functions to terminal Nos. is necessary.
Remote contacts terminals
EX1 EX2 EX3 EX4 COM
| Functions | Terminals | Remarks |
(1) | Printing on/off and selection of three chart | 2 terminals (EX1, EX2) | Programming 3 speeds, See Section 13.3. (Note 1) |
| speeds | ||
|
|
| |
(2) | Execution of message printing (No.1 to 5) | 4 terminals (EX1 to EX4) | Programming message, See Section 11.10. (Note 2) |
(3) | Execution of message printing (No.1 and 2) | 2 terminals (EX1, EX2) | Programming message, See Section 11.10. (Note 3) |
|
|
|
|
(4) | Execution of digital data printing | Any 1 terminal |
|
(5) | Execution of list printing (list 1, 2, 3) | Any 3 terminals |
|
|
|
|
|
(6) | Execution of operation record (No.A to D) | Any 4 terminals | Programming operation record, See Section 13.4. |
|
|
|
|
(7) | Reset of totallization | Any 1 terminal | Available in totalization (option) |
|
|
|
|
(Note 1) Free terminals left are EX3 and EX4. (Note 2) No free terminals are left.
(Note 3) Free terminals left are EX3 and EX4.
2
Functions and Terminal Contact Signals | ON: Short OFF: Open |
Functions | Contact signal at terminal |
•Program 3 chart speeds first. See Section 13.3.
| Printing on/off and selection |
| With COM | |||
| of 3 hart speeds |
| EX1 |
| EX2 | |
(1) Printing on/off and selection of |
|
| CS1 | OFF |
| OFF |
3 chart speeds | Printing: On |
| CS2 | ON |
| OFF |
|
|
| CS3 | OFF |
| ON |
| Printing: Off | ON |
| ON | ||
(Note) Program “Printing on/off” to on with a key operation in advance.
•Program messages first. See Section 11.10.
| Messag |
|
| With COM |
|
|
|
|
| |
| e | EX1 | EX2 |
| EX3 |
|
| EX4* | ||
| No.1 | OFF | OFF |
| OFF |
| For trigger | |||
| No.2 | ON | OFF |
| OFF |
|
|
|
|
|
(2) Execution of message printing | No.3 | OFF | ON |
| OFF |
|
|
|
|
|
|
|
|
|
|
| |||||
No.4 | ON | ON |
| OFF |
|
|
|
|
| |
(No. 1 to 5) |
|
|
|
|
|
| ||||
|
|
|
|
|
| |||||
No.5 | OFF | OFF |
| ON |
| 1 sec. or more | ||||
|
|
| ||||||||
*When the trigger signals is sent (for 1 sec. or more) after selecting the message No., the printing of programmed message starts.
(Note) Program “Printing on/off” to on with a key operation in advance. Execution of message printing with key operation is also available. See Section 9.4.
－８７－
