Omega RD200, RD2800 manual Measured value screen, Clock screen, Alarm activation screen

6.BASIC OPERATION

6.4 Switching Operation Screen (RD200)

For RD200, three operation screens, (1) measured value screen, (2) clock screen and (3) alarm activation screen, are available. Each time DISP is pressed, the screen switches. Bargraphs for analog indications are displayed in any of these screens.

Measured value

screen

DISP

Clock screen

DISP	Alarm activation	DISP
	screen

(Note) The alarm activation screen is only available when an alarm activates (shown by dotted lines). When no alarm activates, this screen is skipped.

1Measured value screen

The screen differs on Model No. (number of pens).

1) 1-pen type (CH 1)

Ch 1 Time Chart speed

3) 3-pen type (CH 1 to 3)

Ch 1 Ch 2 Ch 3 Chart speed

2) 2-pen type (CH 1 and 2)

Ch 1 Ch 2 Time Chart speed

4) 4-pen type (CH 1 to 4)

Ch 1 Ch 2 Ch 3 Ch 4

2Clock screen

Year MonthDay Time Chart speed

3Alarm activation screen

This screen is only available when an alarm activates.

For alarm types, see Section 11.5, item 1 .

Screen when turning on the Reference power supply

When the power supply is turned on, the measured value screen appears.

Explanation for alarm activation

In each channel, the alarm level 1, 2, 3 and 4 are allocated to the digits from the left end. The alarm type shall be displayed only at the digit where an alarm activates.

Ｈｂ

Alarm type at level 1

Alarm type at level 2

Alarm type at level 3

Alarm type at level 4

－３０－