5. INSTALLATION
5.3 Recording Pen Loading
3Plotter Pen Loading
(1)Before loading, remove the pen cap from the plotter pen and write letters on a paper, etc. for testing.
(2)Insert the plotter pen into its penholder completely.
(Note) Incomplete insertion may result in
recording troubles.
(3) For unloading of the plotter pen, pull it from Plotter pen the penholder.
Plotter pen loading
Main shaft
Penholder
4
Cartridge Pen Loading
(1)Before loading, remove the pen cap from the cartridge pen and write letters on a paper, etc. for testing.
(2)Push the cartridge pen into the penholder for the same pen No. as the pen.
Cartridge Pen Loading
• RD200 | • RD2800 |
2
1
Push in.
Insert 1 first, then push in 2 .
(3)For unloading of the cartridge pen,
●RD200: Pull out the left side of the pen from the holder, and then take off it by disengage its convex part at the right side of the holder.
●RD2800: Pull the pen from the holder.
－２６－
