Omega RD200, RD2800 manual Range No. Tables, Voltage input, Thermocouple input *1

8.BASIC PROGRAMMING

8.2 Range/Printing Range

4

Range No. Tables

1) Voltage input

№ Input type Measuring range Remarks

01-13.80 to 13.80 mV

02DC -27.60 to 27.60 mV

-69.00 to 69.0003mV

	(mV)
04		-200.0	to	200.0	mV	For current
05		-500.0	to	500.0	mV
						input, see
06		-2.000	to	2.000	V
						Item 16.2.
07	DC	-5.000	to	5.000	V
08		-10.00	to	10.00	V
	(V)
09		-20.00	to	20.00	V
10		-50.00	to	50.00	V

2) Thermocouple input (*1)

No.	Input			Measuring range
	type		°		°
			C			F
21	K	-200.0	to	300.0	-320.0		to	570.0
22		-200.0	to	600.0	-320		to	1110
23		-200	to	1370	-320		to	2490
24	E	-200.0	to	200.0	-320.0		to	390.0
25		-200.0	to	350.0	-320.0		to	660.0
26		-200	to	900	-320		to	1650
27	J	-200.0	to	250.0	-320.0		to	480.0
28		-200.0	to	500.0	-320.0		to	930.0
29		-200	to	1200	-320		to	2190
30	T	-200.0	to	250.0	-320.0		to	480.0
31		-200.0	to	400.0	-320.0		to	750.0
32	R	0	to	1200	32		to	2190
33		0	to	1760	32		to	3200
34	S	0	to	1300	32		to	2370
35		0	to	1760	32		to	3200
36	B	0	to	1820	32		to	3300
37	N	-200.0	to	400.0	-320.0		to	750.0
38		-200.0	to	750.0	-320		to	1380
39		-200	to	1300	-320		to	2370

No.	Input type			Measuring range
			°C				°F
40	W-WRe26	0	to	2315		32	to 4200
41	WRe5-WRe26	0	to	2315		32	to 4200
43	PtRh40-	0	to	1888		32	to	3400
	PtRh20
44	NiMo-Ni	-50.0	to	290.0		32.0	to	550.0
45		-50.0	to	600.0		32	to	1110
46		50	to	1310		32	to	2350
47	CR-AuFe	0.0	to		280.0K	0.0	to	300.0K
48	Platinel	0.0	to	350.0		-140.0	to	660.0
49		0.0	to	650.0		-140	to	1200
	Ⅱ
50		0	to	1390		-140	to	2530
51	U	-200.0	to	250.0		-320.0	to	480.0
52		-200.0	to	500.0		-320.0	to	930.0
53		-200.0	to	600.0		-320	to	1110
54	L	-200.0	to	250.0		-320.0	to	480.0
55		-200.0	to	500.0		-320.0	to	930.0
56		-200	to	900		-320	to	1650

3) Resistance thermometer input (*2)

No.	Input			Measuring range
	type		°		°
			C		F
70	Pt100	-140.0	to	150.0	-220.0	to	300.0
71		-200.0	to	300.0	-320.0	to	550.0
	(JIS’97)
72		-200.0	to	850.0	-320	to	1560
73	Pt100	-140.0	to	150.0	-220.0	to	300.0
74	QPt100	-200.0	to	300.0	-320.0	to	550.0
75	JIS’89	-200.0	to	649.0	-320	to	1200
76	JPt100	-140.0	to	150.0	-220.0	to	300.0
77		-200.0	to	300.0	-320.0	to	550.0
78		-200.0	to	649.0	-320	to	1200
79	Pt50	-200.0	to	649.0	-320	to	1200
80	Pt-Co	4.0	to	374.0K	4.0	to 374.0K

*1: (1) No.21 to 39: IEC584, JIS C 1602-1995	*2: (1) No.70 to 72: IEC751(1995), JIS C 1604-1997
	(2) No.73 to 75: IEC751(1983), JIS C 1604-1989
(2) No.40 to 50: ASTM
	JIS C 1606-1989
(3) No.51 to 56: DIN43710
	(3) No.76 to 78: JIS C 1604-1981
	JIS C 1606-1989
	(4) No.79: JIS C 1604-1981

Remarks Decimal point position and engineering units

Decimal point position: Even if the decimal point position is programmed in the printing range, the actual display/printing position is shown as described in the table above depending on the range No. For changing the decimal point position, see Section 11.2 “Scale programming”.

Engineering units: Engineering unit is shown as described in the table above depending on range No. (Temperature unit is fixed to “°C” except No. 47 and 80). For changing the engineering unit, see Section 11.8 “Unit programming”.

－４２－