14. PRINTING FORMAT
14.3 Programming Zone Printing
3 Programming Flow Chart (RD200)
<Example> Programming CH 1 and CH 3 to zone No.1, and CH 2 and CH 4 to zone No. 2
Operation screen | DISP |
|
[Checking printing format] | SHIFT + DISP | Ref. 1 |
(1)
StandardSET
Remedial measure
Remarks 1 to error display
Press any key other than SHIFT
and program again. When it is normal, the next screen appears.
Remarks 2 Return to the screen of Step (4)
For storing parameters into memory, return the screen to Step (4).
[To be ready for programming]
END
Remarks 3 Selection and overlapping of channels
(2)
CursorZone
ºF （3 time）→ ENTRY
[Selecting zone printing]
The channel not selected in any zone is skipped. Also, if the selection of channel is overlapped or the skipped channel is selected, error display appears.
(3)
Cursor | Various | → | ENTRY |
[Programmingchannelof1starea] | keys | ||
|
| Remarks 1 |
(4)
∗
|
|
|
[Programmingchannelof2ndarea] | Various | Remarks 1 |
keys |
(5)
∗
[To display step (4)] | ENTRY | Remarks 2 |
(6)
SHIFT + SET
END
| Stored | Ref. 2 | |
|
|
|
|
Reference 1 Checking parameters
Press ENTRY to display parameters. The parameters are displayed sequentially each time ENTRY is pressed.
Reference 2 Storing
Store the parameters into memory. (Programming change mark is printed.)
Reference 3 Border mark
“+” mark is printed at the border of the area.
*Fill unused digits with spaces.
－９７－
