Omega RD200    , , , , To clear none the scale programmed

11. OTHER PROGRAMMING

11.2 Scale

4 Programming Mode

 

displayCharacter	Cursor	Channel	Scale (max. 11 digits by left-justify) Unused digits are filled with spaces
				Min. value		to		Max. value
				(within 5 digits)				(within 5 digits)
				Scale value to	SHIFT	+	－	Scale value to
				print 0%			(-)	print 100%

5 Programming Flow Chart Remarks

To clear (none) the scale programmed

<Example> –100 to +100 for CH 3
		Operation screen				DISP
[Check]			SHIFT	＋	4	Ref. 1
					SCALE
	
	Channel		SET
[To be ready for programming]			END
	
	Cursor		3			Remarks
[Selecting channel]			UNIT
	
	Channel		Various			Ref. 2
[Programming scale]			keys
	
		Scale	※
			ENTRY
YES		Error message appears?
Any key other
than SHIFT		NO
		Temporarily stored
YES		Programming other channels?
		NO
			SHIFT	＋	SET
					END
		Stored			Ref. 3
					－５８－

(1) Select the channel to program to

“none” with	/	or % .*
(2) Press SHIFT	and	CLEAR
		0

simultaneously to clear and execute [temporarily storing] and [storing].

*If a channel is programmed by a numeric value, not by up and down keys, and cleared, the channel before programming change is programmed to scale “none”.

Note) The scale of the channel, of which scale was programmed to “none”, is reflected by the printing range being programmed in the [Range/Printing range]. Tag and alarms are cleared (not programmed).

Reference 1		Other channels check
Press	/	or	%	to check
the programmed scale of other
channels.
Reference 2		Various keys

•Adding/deleting decimal point Move the cursor to the right:

・	or	SPACE	→ Numeric keys
CLOCK		COPY(=)
• Programming “to”:			SHIFT +	－
				(-)

•Space: COPY(=)SPACE

Reference 3 Storing

Store the [temporarily stored] parameters into the memory. (A programming change mark is printed.)

* Fill unused digits with spaces.