Omega RD2800, RD200 manual Printer Check,     ,   

19. HARDWARE CHECK

19.2 Printer Check

This is for checking of trace printing with the cartridge pens and digital data printing with the plotter pen.

1

Example of Printing Check – When the time-axis synchronization (POC) is “off” in 3-pen type

2

Check Flow Chart

									∗
				Operation screen							DISP
											2 sec. or more
						( SHIFT		6		)
								+ A- Z
[Engineering mode selection]						3 sec. or more				Reference
		  
				Cursor
							Check
[Selecting check]						°F		°C
		  
					Cursor
[Selecting check items]						ENTRY
			   
				Cursor
[Selecting printer]						°F		°C
 			   
	Cursor
		(1) (2)			(3)			(4)

Check printing details

1.Digital data printing (Plotter pen) Two lines are printed. The number of characters per line is 40 with AL and

72with the AH (repetition of A to Z, 1 to 9 and 0).

2.Trace printing (Cartridge pens) Each pen prints a sine curve.

(Note)

Even when the time-axis synchronization is on, printing s executed in condition of the time-axis synchronization “off” during printing check.

* DISP is not accepted during printing check.

Cancellation of printing check

For cancellation of printing check,

[Displaying check]

ENTRY

press	REC	and then press ENTRY .
	ON/OFF

  

ENTRY

[Executing check]

Digital data printing starts first.

REC → ENTRY

ON/OFF

Stop checking operation

By pressing DISP for 2 seconds or

more, the screen returns to the operation screen, but the printing disables. For changing the printing to

enable, press	REC	and then press
	ON/OFF
ENTRY again.

Reference Types of engineering mode and check 1

See Reference 1 and Reference 2 in section 19.1.

－１１１－