Omega RD200, RD2800 manual 20/25, Remote, Record

7. PROGRAMMING

7.3 List of Programming Items

Names	Programming	Key operations			Programming	Defaults	Programming ranges			Ref.
	items				contents					page
	Chart speed			1	Speed No.	1	1 to 3			13.3
	(3 speeds)	SHIFT	＋ CHART
					Speed	20/25*	0001 to 0600 mm/h or 0001 to 0200
							mm/min
					Terminal No.	1	1 to 4
		0		5
	Terminal		＋				Selection from 13 items;
Remote		CLEAR		DATAI			non, printing on/off & 3 kinds of chart			13.2
	allocation	(3 sec. or more)			Operation	non	speed, message printing (No. 1 to 2),
contacts							message printing (No. 1 to 5), operation
							record (A/B/C/D), digital data printing, list
							printing (No. 1to 3) and totalizing reset
		0		2	Printing No.	A	A, B, C, D
	Operation		＋
		CLEAR		TAG			10 to 90%.			13.4
	record	(3 sec. or more)			Printing	0	Printing position when the contact is
					position		open. The printing position is at +5 mm
							when it is shorted.
					Format	Sd	Select Ar from Sd (standard), Ar, SP, and
							PL.
					Channel	Not	1 to 4
						programmed
					Zero for range 1	Not	a (Minimum value ≤ a < b)
						programmed
	Automatic				Span for range 1	Not	b (a < b < c)
						programmed				14.1
	range shift	SHIFT	＋ DISP
						Not
	(Ar)				Span for range 2		c (b < c < d)
						programmed
					Span for range 3	Not	d (c < d < e)
						programmed
					Span for range 4	Not	e (d < e < f)
						programmed
					Span for range 5	Not	f (e < f ≤ maximum value)
						programmed
					Format	Sd	Select SP from Sd (standard), Ar, SP, and
							PL.
					Channel	Not	1 to 4
Record						programmed
					Printing position	Not	0 to a (%)
format					for broken point 1	programmed
	Compressed/				Printing position	Not	a to 100 (%)
		SHIFT		DISP	for broken point 2	programmed				14.2
	Expanded		＋
						Not
	(SP)				Scale at zero		b (Minimum value ≤ b < c)
						programmed
					Scale for broken	Not	c (b < c < d)
					point 1	programmed
					Scale for broken	Not	d (c < d < e)
					point 2	programmed
					Scale for span	Not	e (d <ｅ≤ maximum value)
						programmed
					Format	Sd	Select PL from Sd (standard), Ar, SP, and
							PL.
					CH for area 1	Not	1 to 4
	Zone scale					programmed			Area1
		SHIFT	＋ DISP		CH for area 2	Not	1 to 4 (Except channels	for		14.3
	(PL)					programmed	area 1)		and2
					CH for area 3	Not	1 to 4 (Except channels	for	onlyfor
						programmed	area 1 and 2)		RD200
					CH for area 4	Not	1 to 4 (Except channels for
						programmed	area 1 to 3)
	Protocol	SHIFT	＋ SPACE							15.1
Communi-				COPY(=)	For details, refer to		the separate instruction	manual for
		(3 sec. or more)
cations					“Communications Interface”.
interface	Specifications	SHIFT	＋	－						15.2
				(-)

(3 sec. or more)

* RD200: 20 mm/h, RD2800: 25 mm/h

－３６－