9. PRINTINGS

9.3 List Printing

The details of programming such as "Range/Printing range" and "Scale" can be printed as a list with the plotter pen. As this includes large amount of data and takes time, it enables to divide the data into two and select printing of "List 1" or "List 2".

 

List 1: Major parameters …. “Range/Printing range”, “Chart speed”, “Printing format”, etc.

 

 

 

List 2: Parameters other than the above …. “Message”, “Time axis synchronization.” and “option-related-items”

 

List 3: All parameters …. “List 1” + “List 2”

 

 

 

 

 

 

 

1

List 1 Printing

 

 

 

 

(1) Press

SHIFT

and

9

simultaneously, and then

 

 

 

 

 

 

 

 

 

DISP

 

LIST

 

 

 

 

Operation screen

 

press

ENTRY.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2) The selection screen from [List 1] to [List 3] appears.

 

 

 

 

 

 

SHIFT

 

9

(1)

 

 

 

 

 

 

 

Move the cursor to “1”.

 

 

 

 

 

 

 

 

 

 

LIST

 

 

 

[List No. selection]

 

°F

or

 

°C

 

(3) When ENTRY

is pressed,  

 

 

 

appears for about 5 sec. For execution, go to

 

 



 

 

(2)

 

 

 

 

 

 

procedure (4). For no execution, press DISP .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cursor

 

ENTRY

(3)

ENTRY (4)

(4) Press

ENTRY

to start “List 1” printing. The cartridge

 

 

 

 

 

 

pen moves to the end of the left side and the chart

 

 

 

 

List 1 printing starts.

 

 

 

 

 

 

 

 

 

 

paper forwards slightly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(5) For interrupting the printing, press ON/OFFREC and ENTRY

 

YES*

 

 

 

 

 

 

 

 

 

simultaneously. Your recorder returns to the normal

 

 

 

Interrupt?

 

 

(5)

 

operation but the printing operation is turned off. For

 

 

 

 

 

 

 

 

REC

ENTRY

 

 

 

 

 

turning on the printing operation, press

REC

and

 

NO

 

 

 

 

 

 

 

 

 

ON/OFF

 

 

ON/OFF

 

 

 

 

 

 

 

 

then press ENTRY again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(6) When the list printing completes, your recorder

 

 

 

 

List 1 printing ends.

 

(6)

 

returns to the normal operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Approx. 30 min. for printing)

 

 

 

 

List 1 printing details

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1) Year/month/day, Time

(2) Chart speed (Note)

* With this procedure, the printing operation turns

(3) Range/Printing range

(4) Scale

 

 

(5) Subtract printing

(6) Periodic data printing

off. Press

 

ON/OFFREC

and then press

 

ENTRY

again to

(7) Printing format

 

(8) Alarm

 

 

turn it on.

 

 

 

 

 

 

 

 

(Note) When the remote contacts (option), which can

 

 

 

 

 

 

 

 

 

program 3 speeds (No.1 to No.3), is added,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the presently selected speed is printed.

 

 

Remarks

List 1 printing cannot be executed in

 

 

 

 

 

 

 

 

the following conditions.

 

 

 

Example of the List 1 printing

 

 

 

 

 

 

 

 

 

(1)RECORD ON status lamp is not lit.

(2)KEY LOCK status lamp lights. Chart speed does not affect to this operation. Chart paper forwards at a fixed speed.

Reference Operation during printing

(1)Trace printing with a cartridge pen is interrupted. Other functions are continued without being interrupted.

(2)Programming any parameters (Range/Printing range, Scale, Alarm, etc.) cannot be executed during printing. Program them after the printing ends.

(Note) The above example is for RD200. It is the same for RD2800.

-48-

Page 52
Image 52
Omega RD200, RD2800 manual List Printing, List 1 Printing