6.BASIC OPERATION
6.2 Printing ON/OFF and chart end detection
1Printing On/Off
|
|
|
|
| REC |
|
|
| ||
Every time pressing | then | ENTRY | within 5 | |||||||
ON/OFF | ||||||||||
sec., the printing function switches to on or off. | ||||||||||
|
|
|
|
|
|
| Status |
| ||
|
|
|
|
|
|
|
| |||
|
| Printing ON |
|
|
| RECORD ON | lights. | |||
|
|
|
|
|
|
|
|
|
| |
|
|
| REC | → | ENTRY | Remarks 1 | ||||
|
|
| ON/OFF | |||||||
|
|
|
|
|
|
| Status |
| ||
Printing OFF 
RECORD OFF goes out.
REC → ENTRY Remarks 2
ON/OFF
Reference 1 Printing status when turning on the power supply
When turning on the power supply, the printing maintains the condition (on or off) when it was turned off last time.
Reference 2 Up and down of pens
(1)When the printing is turned off, each pen lifts up automatically. Even if the power is turned off in this condition, this pen position is maintained.
(2)When the chart cassette is pulled out, each pen lifts up. If the printing has been turned off when pulling out the chart cassette, each pen has already been lifted up and it maintains its position.
Status display when printing is on
Lights when the printing is on.
Remarks 1 No printing on/off operation executed
(1)The printing on/off operation is not executed when the status KEY LOCK lights. For its cancellation, see Section 11.13.
(2)The printing on/off operation is not executed when the printing is turned off by the remote contacts signal (option). See Section 13.1.
Remarks 2 Execution by pressing ENTRY key
(1) appears for about 5 sec.
when pressing REC key. Press ENTRY
ON/OFF
during this display to execute the printing on/off operation.
(2)The printing on/off operation cannot be executed by pressing ENTRY after this display goes out.
In such case, press REC and then ENTRY
ON/OFF
again.
2Printing Operation
The table below explains the printing operation when the printing is on or off.
Operation | ON | OFF | |
|
|
| |
Chart feeding | Execute | Stop | |
|
|
| |
Trace printing | Execute | Up where it | |
(Cartridge pen) | is | ||
| |||
|
|
| |
Digital data printing | Execute | Up at | |
standby | |||
(Plotter pen) | |||
| position | ||
|
| ||
Up and down of pens | Down | Up | |
|
|
|
3 Chart End Detection
When the chart end is detected during the printing is on, the printing is switched to off and CHART END blinks. Each pen lifts up automatically and the printing is stopped.
For continuing the printing, refer to “Chart loading” in Section 5.1 and 5.2.
－２８－
