Omega RD2800, RD200 manual Alarm Display and Printing, Display of Alarm Activation

10. OPERATIONS

10.3 Alarm Display and Printing

1

Display of Alarm Activation

The alarm activation information can be checked in the operation screen.

1) Measured value display screen

<Ex.> Alarm activated at CH 1 in 3-pen type

(2)

(1)

Display in case alarm activated

(1) ALARM status lamp lights.

(2) The measured value of the channel in alarm blinks.

(To cancel blinking)

Press ENTRY . The measured value is displayed steadily.

(Note) The above example is for RD200. It is the same for RD2800.

2) Alarm display screen

<Ex.> Alarm activated at CH 1 in 3-pen type

(2)

(1)

(3)

(Note) The above example is for RD200. It is the same for RD2800.

Display in case of alarm activated

(1)The character display shows “”.

(2)The alarm type at the level, of which the alarm is activated, is displayed for each channel.

(3)ALARM status lamp lights.

(Note) If no alarm activates, the alarm display screen is not displayed even when DISP is pressed.

2

Alarm Activation/Reset Printing

Alarm activation and reset are printed on the right side of the chart paper.

1) Printing format when an alarm activates				2) Printing format when an alarm is reset
	1 3 : 5 9 1 H 1			1 4 : 0 5 1 - 1
			Time			Time
			Channel			Channel
			Type			Hyphen
			Level			Level
		Printing example of alarm activation			Printing example of alarm reset

－５５－