11. OTHER PROGRAMMING
11.9 Tags
Tags up to 9 digits can be assigned for digital data printing and scale printing.
Press SHIFT and simultaneously to display the [Tag] programming screen. The default is no programming of tags.
| Example of tag printing (RD200) |
(Scale printing) | (List printing) |
1
Programming Mode
Note) The default is no programming of tags. The following figure is an example of
Tag character
*1
(Fixed) | Cursor |
|
Channel | Digit No. of tag character *2 |
|
|
|
|
| |
| (Up to 9 digits.) |
|
|
| (Numeric numbers (1 to 9) appear for the digit not programmed by pressing | ° | .) |
|
| F |
|
*1: Tag character
The character at the digit where the digit number is pointed by the cursor is displayed.
*2: Digit No. of tag character
A digit No. 1 to 9 is displayed by pressing °F .
<To decrease the digit No.>
Press SHIFT and simultaneously to clear the digit No. and press °F for reprogramming a new digit No.
If clear is stored in the scale mode;
If the scale is cleared in a channel; the tag of this channel is deleted. Reprogram it if necessary.
－７１－
