－５１－
9. PRINTING 9.5 Printing Format Selection This selection is only applicable to the printing format function (option). Four types of analog printing format are
available.
1 Types of Printing Format
Before the selection, the programming of the
desired format is required. See Section 14.
The default is the standard format (
).
Types Programming
(1) Standard (
) Not required
(2) Automatic range shift (
) Section 14.1
(3) Compressed/expanded (
) Section 14.2
(4) Zone (
) Section 14.3
2 Selection Flow Chart
<Example> From Standard printing to Zone printing
Operation screen
[Check]
＋
[To be ready for programming]
[Selecting format]
“Standard” selected?
Programming screen for the selected format appears.
＋
Stored
Decimal point appears in the current
format.
(1)
: Standard
(2)
: Automatic range shift
(3)
: Compressed/expanded
(4)
: Zone
1. To store the standard format;
Press key.
2. To store the format other than the
standard:
Press and then press
and simultaneously.
The selected format is stored into
memory. The trace printing is
executed in the stored format.
(Programming change mark is
printed.)
Cursor
① ② ③ ④
NO
Zone
YES
Types of format and programming
Printin
g
format check
Reference 1
Storin
g
procedur
e
Reference 2
Storin
g
DISP
SHIFT
SET
END
℃
ENTRY
SHIFT
SET
END
ENTRY
ENTRY
SHIFT
SET
END
Reference 3
DISP