![](/images/new-backgrounds/1280331/28033153x1.webp)
System has found a satellite and is fine tuning the signal
SELECT A
SELECT B
PINNACLE POSITIONER
by WINEGARD
Fine Tuning
Elevation
Model
Figure 10
9.Verify that system has found correct satellite (you will see a picture). Since DBS services use a digital signal and the satellites are only separated by 9o, the system can find the wrong satellite. Press [SELECT A] if correct satellite was found, Figure 11. You are now ready to watch satellite TV! If the wrong satellite was found, press [SELECT B] to continue the search.
If no satellite is found the message Satellite Not Found, Press Any Button, will be displayed by the positioner. Press any button to return to the menu shown in Figure 1, page 4.
7. Press SELECT A if correct satellite was found
SELECT A
SELECT B
Correct Satellite Continue Search
PINNACLE POSITIONER
by WINEGARD
Model
Press SELECT B if correct satellite was not found
Figure 11
NOTE: If after two (2) tries you still get "Satellite Not Found" check that:
1.The antenna has a clear view of the satellite(s), no trees, buildings, etc. blocking the view. The satellite signal will not pass through solid objects.
2.Your receiver is turned ON.
3.The positioner is connected to the receiver correctly, refer to Installation Manual.
If after checking the above, you still do not find a satellite refer to the
Troubleshooting Manual.
Rev. 2/97
27