Winegard RD-9946 installation manual Cable Roof-thru Plate Installation, Qty, Description Use

Cable Roof-thru Plate Installation

If your going to use option B for you cable entry in to your RV/coach proceed to step 1.

1.To install the cable roof-thru plate make sure that you have the following:

QTY	Description	Part #	Use
1	3 oz. Silicone Sealant	2460007	Used to seal cable entry plates
1	Dual cable roof-thru plate	3200159	Seal dual cable entry
10	#10 x 1" Screw	2160178	Attach cable entry plate(s) to
			roof

3.Apply silicone sealant under lip of roof-thru plate and where cable enters roof. See Figure 18.

4.Attach plate to roof with screws provided. See Figure 18.

5.Apply silicone sealant over screws and around edge of roof-thru plate, making sure cable entry is sealed.

#10 x 1" Screws

Apply silicone under lip and cable roof hole

Dual roof thru plate

Control cable and coax for mount.

Make sure cable entry is sealed

Figure 18

Rev. 6/98

16