Winegard RD-9946 Select Search Satellite, Select Search Sat Set Motor Positions, 101.0, Edit

Select Search Satellite	The Select Search Satellite allows you to perform the following: Select which
	DBS satellite the system will search for, or edit the satellite name and position.
	To change the search satellite, proceed as follows:
	1. Press [SELECT A] Select Search Sat, see Figure 31.
1. Press SELECT A

SELECT A

SELECT B

PINNACLE POSITIONER

by WINEGARD

Select Search Sat Set Motor Positions

Model RD-9900

Figure 31

2.The display will show the current search satellite (factory default is the DSS® satellite(s) at 101.0 orbital position). Press [UP] arrow to scroll to next satellite, Figure 32.

2.Press UP arrow key to scroll to next satellite

SELECT A

SELECT B

PINNACLE POSITIONER

by WINEGARD

DSS	101.0
Edit

Model RD-9900

Figure 32

3. Press SELECT A

3.If you want to search for EchoStar® Dish NetworkTM satellite, press [SELECT A] to enter this satellite into the positioner memory as the search satellite, Figure

33.If this not the satellite you want to search for, press [UP] arrow key until you get the satellite you want, then press [SELECT A]. If the satellite you want is not in the positioner memory, proceed to Add/Edit Search Satellite, page 20.

SELECT A

SELECT B

PINNACLE POSITIONER

by WINEGARD

ECHOSTAR 119.0 Edit

Model RD-9900

Figure 33

38