Finding the Satellite
Method 2:
Entering the Elevation
NOTE: SELECT A chooses top option, SELECT B chooses bottom option.
2. Press SELECT A
One requirement must be met to fully enjoy automatic system TV viewing. The RV must be reasonably level. Any of the leveling indicators available should be adequate for this purpose. If the RV is not leveled, the system may not find the high power satellites.
After the RV has been leveled, proceed as follows:
To find the satellite by entering the elevation angle for your location, proceed as follows:
1.Turn TV ON and tune to channel 3 or 4 (output channel of receiver).
2.Press [POWER] on receiver remote to turn satellite receiver on. Determine correct elevation angle by entering the ZIP code for your location into receiver (refer to receiver manual).
3.On the positioner press [UP/DOWN] arrow button until Search DSS appears on the positioner screen, Figure 12.
1.Press UP/DOWN arrow buttons to get Search DSS on screen
SELECT A
SELECT B
Search DSS Park
PINNACLE POSITIONER
by WINEGARD
Model
Figure 12
4.Press [SELECT A] to enter the search function, Figure 12. (Press [SELECT B] if Search DSS is bottom option on screen.
5.Press [SELECT B] Enter elevation, Figure 13.
3. Press SELECT B
SELECT A
SELECT B
PINNACLE POSITIONER
by WINEGARD
Select a City Enter Elevation
Model
Figure 13
28
