![](/images/new-backgrounds/1280331/28033173x1.webp)
EDIT MENU
2.Press SELECT A or B as appropriate
NOTE: All commands will be shown in bold with brackets, example [SELECT A].
This Edit Menu allows you edit/perform the following functions: Select and edit the search satellite, return system to factory defaults, access the test functions menu, and display the system type and software version. To access the Edit Menu, proceed as follows:
1.Press [UP/DOWN] arrow until Edit is displayed on positioner. See Figure
2.Press [SELECT A or B] Edit, see Figure 29.
1.Press UP/DOWN arrow buttons to get Manual Move on screen
SELECT A
SELECT B
PINNACLE POSITIONER
by WINEGARD
Edit
Search DSS
Model
Figure 29
4.Press SELECT A to enter code
3.Press [UP] arrow button until positioner display shows 3000. See Figure 30.
3.Press UP button until 3000 is displayed
SELECT A
SELECT B
PINNACLE POSITIONER
by WINEGARD
Enter Code: 3000
Model
Figure 30
4.Press [SELECT A] Enter Code: 3000 to access Edit Menu. See Figure
NOTE: To exit Edit Menu, press [DOWN] arrow key, then [SELECT B] Quit to exit Edit Menu.
37