Positioner Does Not Respond
If the positioner does not respond to commands, proceed as follows:
1.Unplug positioner from AC power for 3 seconds, then plug positioner back into AC power. The positioner will display the normal menu. See Figure 8.
1. Press SELECT B Park | Name of search satellite |
|
SELECT A
SELECT B
Search XXXXXX Park
PINNACLE POSITIONER
by WINEGARD
Model
Figure 8
2.Press [SELECT B] Park to put antenna into the park position. See Fig. 8.
3.Visually verify that antenna is in correct park position.
If antenna does not go to the correct park position or fails to respond after being unplugged and then plugged in again, contact Winegrad Service Dept.
56
