MOVE TO LAST SATELLITE
2.Press SELECT A or B as appropriate
NOTE: All commands will be shown in bold with brackets, example [SELECT A].
Move to Last Satellite: This function allows you to move the antenna to the last position that the system found a satellite. This feature is very useful. It allows you to put the antenna into the travel position and if the RV/coach was not moved return to watching TV without performing the search function. To move antenna to the last satellite position, proceed as follows:
1.Press [UP/DOWN] arrow until Move to Last Sat is displayed on positioner. See Figure 25.
1.Press UP/DOWN arrow buttons to get Move to Last Sat on screen
SELECT A
SELECT B
PINNACLE POSITIONER
by WINEGARD
Move to Last Sat Manual Move
Model
Figure 25
2.Press [SELECT A or B] Move to Last Sat, see Figure 25. The positioner will display the message Moving to Satellite while antenna is moving to last saved satellite position. When antenna stops moving, the system will acquire satellite signal (if you have not moved the RV/coach) and you will be watching TV!
34
