Winegard RD-9946 Enter Elevation Enter Location, Press Select B, Press UP arrow button

Finding the Satellite

Method 3:

Entering the Latitude

and Longitude

One requirement must be met to fully enjoy automatic system TV viewing. The RV must be reasonably level. Any of the leveling indicators available should be adequate for this purpose. If the RV is not leveled, the system may not find the high power satellites.

After the RV has been leveled, proceed as follows:

NOTE: Winegard does not warrant this system to work outside the continental United States (latitude 25o to 50o, longitude 65o to 125o).

To find the satellite by entering the latitude and longitude for your location proceed as follows:

1. Turn TV ON and tune to channel 3 or 4 (output channel of receiver).

NOTE: SELECT A chooses top option, SELECT B chooses bottom option.

2. Press SELECT A

2.Press [POWER] on receiver remote to turn satellite receiver on.

3.On the positioner press [UP/DOWN] arrow button until Search DSS appears on the positioner screen, Figure 17.

1.Press UP/DOWN arrow buttons to get Search DSS on screen

SELECT A

SELECT B

PINNACLE POSITIONER

by WINEGARD

Search DSS Park

Model RD-9900

Figure 17

4. Press SELECT B

4.Press [SELECT A] to enter the search function, Figure 17. (Press [SELECT B] if Search DSS is bottom option on screen.

5.Press [UP] arrow button, Figure 18.

3.Press UP arrow button

SELECT A

SELECT B

Enter Elevation Enter Location

PINNACLE POSITIONER

by WINEGARD

Model RD-9900

Figure 18

6.Press [SELECT B] Enter Location, Figure 18

NOTE: If you do not know your latitude and longitude you can refer to

Figure 40, page 25.

30