![](/images/new-backgrounds/1280331/28033177x1.webp)
Add/Edit Search Satellite | If you cannot find the search satellite you want, you must add it to the positioner | |
| memory. To add/change the search satellite proceed as follows: | |
| 1. | Perform steps 1 through 4 page 18 if you are not in the Edit Menu. |
1. Press SELECT A | 2. | Press [SELECT A] Select Search Sat, see Figure 34. |
|
|
SELECT A
SELECT B
PINNACLE POSITIONER
by WINEGARD
Select Search Sat Set Motor Positions
Model
Figure 34
| 2. The display will show the current search satellite (factory default is the DSS |
| satellite(s) at 101.0 orbital position). Press [UP] arrow to scroll to Inactive, |
| Figure 35. |
3. Press SELECT B Edit | 2. Press UP arrow key to |
| scroll to Inactive |
SELECT A
SELECT B
Inactive Edit
PINNACLE POSITIONER
by WINEGARD
Model
Figure 35
3.Press [SELECT B] to access edit menu. See Figure 35.
4.Use the UP/DOWN/LEFT/RIGHT arrow keys to enter the satellite name. The satellite name cannot be longer than eight (8) characters. See Figure 36.
No more than eight (8) characters for satellite name
4.Press UP arrow key to scroll to next character/ number
4.Press RIGHT arrow key to scroll to next character position
SELECT A
SELECT B
XXXXXXXX0.0
Quit
PINNACLE POSITIONER
by WINEGARD
Model
Figure 36 | 4. Press LEFT arrow key to scroll | |
to previous character position | ||
|
4.Press DOWN arrow key to scroll to previous character/number
39