STUDER INNOTEC | COMPACT |
4.2Light Emitting Diodes
| LED |
| Marking | LED lit |
|
|
| LED blinks |
| 1 |
| AC IN | Voltage corresponding to self- | Voltage, outside of the self- | |||
|
|
|
| adjusted values is at the AC IN | adjusted values is at the AC IN | |||
|
|
|
| input. |
|
|
| input. |
| 2 |
| CHARGER | Battery Charger is working |
| The input voltage is out value | ||
|
|
|
|
|
|
|
| (voltage or frequency) |
| 3 |
| SOLAR | Connected | solar modules | are |
| |
|
|
| CHARGE | delivering energy |
|
|
| |
| 4 |
| Program | Programming | mode | for | Aux. |
|
|
|
|
| Contact |
|
|
|
|
| 5 |
| Contact active | Auxiliary Contact is activated |
|
| ||
| 6 |
| Contact manual | Aux. Cont. manually activated |
|
| ||
| 7 |
|
| Transfersystem is active. In- |
| |||
|
|
|
| coming voltage is being sent |
| |||
|
|
|
| directly to AC OUT outlet |
|
| ||
| 8 |
| AC OUT | There is voltage at the AC OUT | The Inverter is in | |||
|
|
|
| outlet |
|
|
|
|
| 9 |
| INVERTER | Inverter is working |
|
| Forced | |
| 10 |
| Over Temp. | For the time being the COMPACT |
| |||
|
|
|
| is out of service because of |
| |||
|
|
|
| overheating. |
|
|
|
|
| 11 |
| Overload | The COMPACT is out of service |
| |||
|
|
|
| because of overload or short- |
| |||
|
|
|
| circuit |
|
|
|
|
| 12 |
| Batt. Low/High | Battery voltage is too low |
| Battery voltage is too high | ||
| 13 |
| OFF | COMPACT is turned off. Turning it | COMPACT is for the time being | |||
|
|
|
| back on is only possible manually. | turned off. Turning it back on will | |||
|
|
|
|
|
|
|
| follow automatically! |
| 14 |
|
| Battery Charger and | or Solar |
| ||
|
|
|
| Charge Controller are doing an |
| |||
|
|
|
| equalization cycle |
|
|
| |
|
| Charge condition of Battery |
| LED 15 – Absorption time is | ||||
|
|
|
|
|
|
|
| running |
| 25 |
| CURRENT | Display the value of the output power in % of Pnom (in Inverter Mode) | ||||
|
|
| MONITOR | and the charge current in Amps. (in Charger Mode) In this mode the | ||||
|
|
|
| 200% LED indicate that power sharing is in use. | ||||
4.3 | Push buttons |
|
|
|
|
| ||
|
|
|
|
| ||||
19 |
| ON/OFF | Turning the COMPACT on and off (Help Button for Programming) | |||||
| 20 |
| RESET | Alarm Signal off (Help Button for Programming) | ||||
| 21 |
| Aux. Contact | Control Aux. contact (Help Button for Programming) | ||||
4.4 | Turning Knobs |
|
|
|
|
| ||
| 22 |
| CHARGER | Adjustment for max. Charging Current (Not for Solar charge controller) | ||||
| 23 |
| TRANSFER | Adjustment for Transfer Voltage Threshold (TRANSFER – INVERTER) | ||||
| 24 |
| STANDBY | Adjustment for „Standby“ system |
| |||
| 26 |
| INPUT LIMIT | Must be adjusted to the maximal available current of your AC INPUT | ||||
|
|
|
| supply (see on chap. 4.6.3) |
|
| ||
User manual | COMPACT V4.0 E | 13 |
