STUDER INNOTEC
COMPACT
User manual COMPACT V4.0 E 22
5.5.1 Diagram of the different modes
9
Show an off LED
Show a blinking LED
Show a lighted LED
CHARGE
R
INVERTER
AC OUTAC IN 1
27
8
9
All the functions are enabled. This is the
factory setting.
CHARGE
R
INVERTER
AC OUTAC IN 1
27
8
9
The inverter is disabled. Only the transfer
switch and the charger will work normally.
CHARGE
R
INVERTER
AC OUTAC IN 1
27
8
9
Charger and transfer switch are disabled. the
inverter will work continuously even if there is
a correct AC voltage at the input
CHARGE
R
INVERTER
AC OUTAC IN 1
27
8
9
Inverter and charger are both disabled.
Only the transfer switch function is enabled in
input voltage and frequency is OK.
Apart from the periodic controls mentioned for the connections, the COMPACT does not need any
maintenance. Keep the appliance clean and from time to time wipe it clean with a damp cloth.
We hereby state that the products described in this user manual meets the following standards:
EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, Dir. 89/336/EEC,
LVD 73/23/EEC
CH-1950 Sion, 31st of March 2000 STUDER INNOTEC (R. Studer)