Sub-Zero 700TFI, 700TR manual Opening Dimensions

INTEGRATED REFRIGERATION

Opening Dimensions

INTEGRATED MODELS

25" (635)

OPENING

DEPTH

TOP VIEW

OPENING DIMENSIONS

COLUMN	W	H
IC-27R, IC-27FI	27" (686)	81" (2057)
TALL	W	H
700TR, 700TFI, 700TCI	27" (686)	80" (2032)
736TR, 736TFI, 736TCI	36" (914)	80" (2032)
DRAWER	W	H
700BR, 700BF(I), 700BC(I)	27" (686)	341/2" (876)

H

OPENING

HEIGHT

SIDE VIEW

W

OPENING WIDTH

FRONT VIEW

The depth of each integrated model is 24" (610). Allow for panel thickness when planning the finished opening depth.

DUAL INSTALLATION

When installing two units side by side in a dual installa- tion, the opening width is the width of the two units added together. A dual installation kit will be required for this instal- lation. If a dual installation kit is not specified, a minimum 2" (51) filler strip is required between units.

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For ques- tions regarding the installation, call Sub‑Zero customer care at 800-222-7820.

IMPORTANT NOTE: Due to a more robust hinge on the 36" unit, if a 27" tall unit is installed next to a 36" unit, the door panels will align but interior face frames will not. This is only apparent when both doors are open. Refer to the illustration below.

736TCI

Face frame alignment.

6 Sub-Zero Customer Care 800.222.7820