Sub-Zero BI-48SID, BI-42SID, BI-36UFD, BI-42SD, BI-30UG manual Freezer Storage

STORAGE

Freezer Storage

FREEZER BASKETS

BI‑36F and side-by-side models To remove, pull forward until basket stops. Pull the two metal clips located behind the bottom two corners of the basket forward, then lift up and out. Refer to the illustration below. To reinstall, push drawer slides in. Align the basket with slides and push back until it stops. Press down on the front of the basket to engage slides.

IMPORTANT NOTE: To remove for models BI-36S, BI-42S, BI-42SID and BI-42SD, the basket must be raised

and pulled through the opening in the door liner after disengaging.

Over-and-under models To remove the upper and lower freezer baskets, lift up and out. Refer to the illustration below. To reinstall, insert the lower basket into the four corner retainers. Position the upper basket onto the side rails and slide back until it clicks.

BI‑36F and side-by-side models. Over-and-under models.

ICE CONTAINER

BI‑36F and over-and-under models To remove, pull con- tainer forward until it stops, then lift out.

Side-by-side models To remove, pull container forward until it stops, then lift to clear the carrier assembly along the back. Pull forward and out. Refer to the illustration below.

Dispenser models To remove, pull container out partially, then rotate and pull out. Refer to the illustration below.

Side-by-side models. Dispenser models.

subzero.com 7