Subaru Robin Power Products EH63D Operating Your Engine, Fuel Valve, Choke Knob, Starting, － 9－

5. OPERATING YOUR ENGINE

NOTE

Following operating method is for the STD type speed control lever. As to the fixed type speed control lever (exp. Generator spec.), do not move it otherwise the genera- tor component such as voltage regulator may be damaged.

STARTING

FUEL VALVE

1

(Provided by the equipment manu- facturer)

Open the fuel valve.

SPEED CONTROL LEVER

2

Set the speed control lever 1/3 of the way towards the high speed position.

CHOKE KNOB

3

CLOSE

Pull the choke knob.

■If the engine is cold or the ambient temperature is low, pull the choke knob fully.

■If the engine is warm or the ambient temperature is high, pull the choke knob half-way, or keep it fully open.

ELECTRIC STARTER

4

STOPRUN

START

Turn the key switch to the "START" position.

■Do not operate the electric starter continuously for more than 5 seconds, even if the engine dose not start.

■If the engine failed to start, set the key to the "RUN" position and wait for about 10 seconds before retrying.

■Never turn the key switch to the "START" position while engine is running.

－ 9－