(4)repairs performed outside of the authorized warranty service dealers
(5)use of parts which are not authorized by FUJI.
2.Add-on or modified parts
This warranty does not cover any part that malfunctions, fails or is damaged due to alter- ations by changing, adding to or removing parts from the engine.
3.Expenses incurred by processing warranty claims
FUJI, any authorized service dealer and warranty station shall not be liable for any loss of use of the engine, for any alternative usage, for any damage to goods, loss of time or inconvenience.
E.HOW TO FILE A CLAIM
All repairs qualifying under this Limited Warranty must be performed by a dealer who sold you the engine or warranty station authorized by ROBIN AMERICA. In the event that any emission- related part is found to be defective during the warranty period, you must notify the Robin America Inc. Customer Service Department at
F. WHERE TO OBTAIN WARRANTY SERVICE
It is recommended that warranty service be performed by the authorized dealer who sold you the engine, although warranty service will be performed by any authorized service dealers or warranty stations anywhere in the United States. When warranty repair is needed, the engine must be brought to an authorized service dealer or warranty station's place of business during normal business hours. In all cases, a reasonable time, not to exceed 30 days, must be allowed for the warranty repair to be completed after the engine is received by the authorized service dealer or warranty station.
G. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS
Only warranted engine replacement parts approved by FUJI should be used in the perfor- mance of any warranty maintenance or repairs on
H. PARTS COVERED UNDER THE CALIFORNIA EMISSIONS WARRANTY
(1)Fuel Metering System
(i)Carburetor and internal parts (and/or pressure regulator or fuel injection system).
(ii)Air/fuel ratio feedback and control system, if applicable.
(iii)Cold start enrichment system, if applicable.
(iv)Regulator assy (gaseous fuel, if applicable)
(2)Air Induction System
(i)Intake manifold, if applicable (ii)Air filter.
(3)Ignition System (i)Spark plugs.
(ii)Magneto or electronic ignition system. (iii)Spark advance/retard system, if applicable.