(5)Miscellaneous Items Used in Above Systems (i)Electronic controls, if applicable (ii)Hoses, belts, connectors, and assemblies. (iii) Filter lock assy (gaseous fuel, if applicable)

I. MAINTENANCE STATEMENTS

It is your responsibility to have all scheduled inspection and maintenance services performed at the times recommended in the 2001 and later Owner's Manual and to retain proof that inspection and maintenance services are performed at the times when recommended. FUJI will not deny a warranty claim solely because you have no record of maintenance; however, FUJI may deny a warranty claim if your failure to perform required maintenance resulted in the failure of warranted part. The proof which you maintain should be given to each subsequent owner of the engine. You are responsible for performing the scheduled maintenance described below based on the procedures specified in the 2001 and later Owner's Manual. The scheduled maintenance below is based on a normal engine operating schedule.

PROCEDURE

INTERVAL

1)

Clean engine and check bolts & nuts

: Every 8 hours (daily)

2)

Check and refill engine oil

: Every 8 hours (refill daily up to upper limit)

3)

Change engine oil

: Initial 20 hours and every 50 hours afterward

4)

Change engine oil filter, if applicable

: Initial 20 hours and every 200 hours thereafter

5)

Check muffler exhaust outlet, clean if necessary : Every 50 hours or weekly

6)

Clean spark plug

: Every 50 hours (weekly)

7)

Clean air cleaner

: Every 50 hours

8)

Check battery electrolyte fluid level

: Every 50 hours

9)Clean fuel filter (and fuel tank, if applicable) : Every 200 hours (Monthly)

10)Clean and adjust spark plug and electrodes: Every 200 hours (Monthly)

11) Replace air cleaner element, if applicable

: Every 200 hours

12)

Clean carburetor

: Every 500 hours

13)

Remove carbon from cylinder head

: Every 500 hours

14)

Adjust valve clearance, if applicable

: Every 500 hours

15)

Check and adjust valve seats

: Every 500 hours

16)

Replace spark plug

: Every 500 hours

17)

Replace fuel lines

: Every 1000 hours (Yearly)

18)

Overhaul engine

: Every 1000 hours

Note : More frequent maintenance may be necessary under dusty, dirty or severe conditions.

Page 7 Page 9
Page 8
Image 8
Subaru Robin Power Products EH63D, EH65D, EH64D manual Maintenance Statements Procedure Interval
Page 7 Page 9

EH63D, EH64D, EH65D specifications

Subaru Robin Power Products have made a name for themselves in the outdoor power equipment industry, known for their reliable and efficient small engines. Among their notable offerings are the EH65D, EH64D, and EH63D models. These engines are designed for a diverse range of applications, including generators, pressure washers, and other outdoor equipment, catering to both commercial and residential customers.

The EH65D is a high-performance engine that boasts a displacement of 645cc, producing impressive power and torque. This model features a dual overhead cam design, which enhances efficiency and performance while contributing to lower emissions. With an electronic ignition system, the EH65D ensures easy starting and consistent operation, providing users with confidence in its reliability.

The EH64D offers a slightly smaller displacement at 639cc but still delivers robust power suitable for demanding tasks. One of the key features of this engine is its advanced cooling system, which prevents overheating during prolonged use. Additionally, the EH64D is designed with a focus on fuel efficiency, allowing users to save on operating costs without sacrificing performance.

The EH63D, while the smallest of the three, does not fall short in capability. With a displacement of 574cc, this engine is optimized for lightweight applications. Its compact design makes it an ideal choice for portable equipment, enabling ease of transportation without compromising on power output. It also incorporates Subaru's proprietary technologies, contributing to enhanced durability and longevity.

All three engines share common characteristics that define Subaru’s quality. They are built with robust materials to withstand rigorous working conditions, while their user-friendly features, such as easy-access oil drain and built-in maintenance indicators, simplify upkeep. The engines are compatible with various attachments, enhancing their versatility for different operational needs.

Furthermore, these models are engineered with an emphasis on reducing noise and vibration, providing operators with a more comfortable working environment. Subaru Robin Power Products has also invested in advanced testing protocols to ensure that each engine meets strict performance and quality standards.

In summary, the EH65D, EH64D, and EH63D engines are a testament to Subaru’s commitment to innovation and quality. With their powerful performance, efficiency, and durability, these engine models are suitable for a wide range of applications, making them an excellent choice for both professionals and DIY enthusiasts. Whether tackling commercial tasks or home projects, users can trust in the reliability of Subaru Robin Power Products.
Top Page Image Contents