MAINTENANCE
Removing The Sear Station® Burner
To remove the Sear Station Burner®, pull the burner tube toward you.. This removes it from the burner tube notch (7).. Then rotate the tube clockwise (8), taking care to rotate it so that the screw at the end of the tube (9) fits through the notch in the heat shield opening (10). When the burner tube is free, remove it from the cookbox (11)..
A)To reinstall the manifold assembly, reverse steps for “Removing Control Panel” as previously described..
m CAUTION: The burner openings (12) must be positioned 
properly over the valve orifices (13). Make sure the opposite 
end of the burner tubes (14) properly align into the slots on 
the backside of the cookbox. Check proper assembly before
fastening manifold in place.
m WARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the grill. (See “CHECK FOR GAS LEAKS.”) ◆
SIDE BURNER MAINTENANCE
mWARNING: All gas controls and supply valves should be in
the OFF position.
Make sure black wire is connected between the igniter and electrode..
Make sure white wire is connected between the igniter and grounding clip..
Spark should be a white/blue color, not yellow..
A) Igniter wire (1)
B)Ground wire (2)
C)Burner (3) ◆
Side Burner Grate 
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
Igniter 
71 | 28 | 115 |
39
104
132 12
143
3 |
2 1
1 | 2 |
34
