BUILT-IN CUTOUT DIMENSIONS
LOCATING YOUR GRILL
When determining a suitable location for your Summit® gas grill installation, give attention to concerns such as exposure to wind, proximity to traffic paths, and keeping any gas supply lines as short as possible. Never locate the Summit® gas grill in a garage, breezeway, shed, under an unprotected overhang, or other enclosed area. Locate the grill and structure so there is enough room to safely evacuate the area in case of a fire.
CLEARANCE FROM SURFACES OR STRUCTURES
mWARNING: Clearance from any surface or structure is
24" (610 mm) from the back and sides of the grill. Refer to “Typical Gas Supply Installation” before starting installation.
mWARNING: The structure, “island”, countertops, and adjacent work areas for the
NOTE: If you have questions on what materials are considered noncombustible, contact your local building materials supplier or fire department. ◆
BUILT-IN STRUCTURE CUTOUT DIMENSIONS
All dimensions are to finished surfaces.
mWARNING: All countertop finished surfaces must be constructed of a noncombustible material. ◆
|
| CLEARANCES |
|
|
| 1 |
|
| 1 | 2 | 1 |
|
|
| |
1 |
| 24" (610 mm) any surface |
|
2 | 27" (686 mm) minimum for lid clearance | ||
| |||
| 3 |
|
|
| 2 |
|
|
| 1 |
|
|
| 460 | 660 | TOLERANCES |
1 | 34" (864 mm) | 42" (1067 mm) | ±1/4" (6 mm) |
2 | 36" (914 mm) | 36" (914 mm) | max |
3 | 24 5/16" (618 mm) | 24 5/16" (618 mm) | ±1/4" (6 mm) |
4
