Summit HP-1L, HP-1S user manual Adjustments for Seating Comfort, Button

ADJUSTMENTS FOR SEATING COMFORT

To maximize seating comfort, your power wheelchair lets you adjust:

B Armrest height.

B Controller position.

B Flip-back and detachable armrest.

B Footrest height.

A. Armrest height	Lever
(Adjustable up to 4” in 1” increments)
To adjust the armrest height, pull and hold the	Button
button on the arm sub-assembly, lift the armrest
up to the desired height (Fig. 11). Release the
button when the armrest is locked.	Fig. 11
B. Controller position
Unscrew the lever underneath the armrest	Button
(Fig. 11). Slide the supporting bar for the
controller to the desired length. Screw back
the lever to lock the controller position.
Controller can be placed either on the left	Pin
side or on the right side. No extra spare parts
are needed.
C. Flip-back and detachable armrest
	Fig. 12

The armrests can be flipped back to easily access the wheelchair (Fig. 12). You can flip back the arm Sub-assembly by pressing and holding the button located in the front bottom of the side panel. To detach the arm sub-assembly, remove the pin at the rear bottom of the arm sub-assembly (Fig. 12).

D. Footrest height

The swingaway footrests are height adjustable. To increase or decrease the height of the footplate,

unscrew the bolt at the rear of the hanger (Fig. 13).

The bolt is located just below the hexagonal partFig. 13 of the hanger. Slide the footplate to the required

height and then re-tighten the bolt.

Page 11