Summit HP-1, HP-1L, HP-1S

ASSEMBLY & DISASSEMBLY

B. Folding the wheelchair

To fold the wheelchair, it is necessary to remove certain components. Follow the

simple guidelines below:

BTurn the wheelchair off.

BPark the chair on a level surface.

BEnsure the wheels are in drive (engaged) mode, with controller lever on the

vertical position (Fig. 9).

BFold up the footrests and remove the entire footrests assembly.

BRemove the battery boxes. You can refer to Disassembly, Section A, Battery

Removal, For Transportation on page 9.

BGrab the strap on the seat upholstery and pull upward. This will pull the

entire frame together (Fig. 10).

Fig. 9 Fig. 10

Page 10

Contents

Main TABLE OF CONTENTS INTRODUCTION COMPONENTS Operation of Chair Ramps and Curbs Transfers, Reaching and Bending B B B B B B General Use While Under The Influence Of Medication Or Alcohol Page ENVIRONMENTAL CONDITIONS ASSEMBLY & DISASSEMBLY ASSEMBLY Z Page Page ADJUSTMENTS FOR SEATING COMFORT B B B B B B B B Note: B Z @ @ @ Page Note: B Note: B B B Z Page B B B B Z Page SPECIFICATIONS LIMITED WARRANTY