Felix Storch, Inc.

SUMMIT APPLIANCE DIV.

INSTALLATION INSTRUCTIONS

Page 3

UNPACKING

Excessive Weight Hazard! * Use two or more people to move and install your appliance. Failure to do so can result in back or other injury.

ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS BEFORE TURNING ON, TO ALLOW THE COMPRESSOR LUBRICANT TO DRAIN.

1. Remove Packaging Materials

2.Remove tape and glue residue from surfaces before turning on the appliance. Rub a small amount of liquid dish soap over the adhesive with your fingers. Rinse with warm water and dry.

3.Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your appliance.

4.When Moving Your Appliance:

Your appliance is heavy. When moving the appliance for cleaning or service, be sure to protect the floor. Always pull the appliance straight out when moving it. Do not wiggle or “walk” the appliance when trying to move it, because floor damage can occur.

5. Clean Before Using

After you remove all of the packaging materials, clean the inside of your appliance before using it. See the cleaning instructions in “Appliance Care.”

6.All upright models have level legs in the front and many also have them in the rear. Level as necessary for best operation.

7.If your appliance has casters, after moving into place, lock the brakes on those casters supplied with brakes. Always unlock before moving the appliance for cleaning.

Keep flammable materials and vapors, such as gasoline, away from appliances. Failure to do so can result in explosion, or fire.

LOCATION REQUIREMENTS

IMPORTANT: Do not install the appliance near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 45°F (7°C). Do not place in direct sunlight.

Check the strength of the floor before installing your appliance. It should hold the weight of a fully loaded appliance. Allow at least 1” (2.5 cm) of airspace at the top and on both sides of the appliance and 1” (2.5 cm) between the back of the appliance and the wall. If the appliance is going to be placed against a wall, if possible, leave extra space on the hinge side so the door can open wider than its width (to make it easier to remove shelves or storage bins).

NOTE: This appliance may be installed side by side with another appliance. Allow for a 3’’ (7.5 cm) clearance at the top and sides, and a ¼” (0.64 cm) clearance between the appliances.

The greater the airflow and ventilation you provide for your appliance—the higher its energy efficiency and performance will be.

Page 2 Page 4
Page 3
Image 3
Summit ALF-620, SCR-600, SWC-6G, FF8, AL-750 owner manual Installation Instructions, Unpacking
Page 2 Page 4

AL-750, ALF-620, FF8, SWC-6G, SCR-600 specifications

The Summit SCR-600, SWC-6G, FF8, ALF-620, and AL-750 are advanced devices that showcase the latest in audio and communication technologies. Each model presents specialized features tailored to meet various user needs, making them valuable tools in both personal and professional settings.

The Summit SCR-600 stands out with its compact design and impressive audio clarity. This device incorporates cutting-edge noise-canceling technology, ensuring that background disturbances are minimized during calls or recordings. The SCR-600 is equipped with an intuitive interface that allows users to navigate its features easily. It also boasts a long-lasting battery life, making it suitable for extended use in various environments.

The SWC-6G is engineered for seamless connectivity, supporting multiple wireless protocols, including Bluetooth and Wi-Fi. This versatility enables users to connect effortlessly to various devices, enhancing productivity and collaboration. Its robust build quality ensures durability, while its sleek design makes it aesthetically pleasing. The SWC-6G also features a high-definition audio processor that delivers immersive sound experiences, whether for calls, music, or multimedia.

The FF8 offers a unique blend of portability and performance. Designed for on-the-go users, this lightweight device is fitted with advanced audio codecs that provide excellent sound quality even in challenging environments. Its quick charging capability ensures that users can rely on it for uninterrupted usage throughout their day. Additionally, the FF8's ergonomic design facilitates comfortable handling during extended use.

The ALF-620 focuses on versatile functionality, functioning seamlessly as both a speaker and a microphone. This dual capability makes it an ideal choice for presentations, video conferences, or casual listening. The ALF-620 uses advanced acoustic engineering to optimize sound distribution, ensuring that audio is clear and balanced in any space. It is also equipped with smart voice recognition, allowing users to control functions with simple voice commands.

Lastly, the AL-750 is renowned for its exceptional sound amplification. This device is engineered for larger environments and gatherings, making it a perfect fit for events or group discussions. The AL-750 incorporates advanced equalization settings, enabling users to customize their audio experience. Its rugged design ensures reliability, making it suitable for outdoor and demanding uses.

In conclusion, the Summit SCR-600, SWC-6G, FF8, ALF-620, and AL-750 represent the forefront of audio technology. Each device offers unique features, ensuring that there is a suitable option for every user’s needs. From exceptional sound quality to versatile functionality, these devices are designed to enhance communication and listening experiences in various contexts.
Top Page Image Contents