Sun Lawn EM-1 owner manual Technical Data

Owner’s Manual — Sunlawn EM--1

6.Now check the adjustment using the small 0.05mm gauge (silver strip) supplied with the EM-1 (or any 0.05mm feeler gauge). If the gauge is held by the cylinder blades but the cylinder and cutting bar are not touching then the adjustment is correct.

7.The blades may also be tested by inserting a piece of paper vertically into the blades while turning them by hand.

!

WARNING

Be careful of injury — handle the blades carefully to avoid cutting yourself. Wear appropriate gloves or hand protection.

TECHNICAL DATA

Battery		2 x 12V / 7.2Ah
Motor Drive		24V, 6A, 140W
Charger	Input:	AC 100 – 240V	50 / 60 Hz 1.5A
	Output:	24V _ _ _ _	1500 mA
	UL listed
Mower	Cutting width:	40 cm
	Weight with battery:	35.2 lb

Cutting height rough (from floor): .4 to 2.2 inches

CE certified: Declaration of Conformity (November 30, 2005)
EMC Order No.	MT-E0511395-1
Machinery Order No.	MT-S0511320-1

12