Owner’s Manual — Sunlawn
The blades, if properly cared for, will mow for years before requiring sharpening. Sharpening can only be done by a professional using a cylinder grinder and proper techniques.
STORAGE
1.Store the
2.The batteries need not be removed for winter storage unless they will be subject to
3.The mower should be stored out of the reach of children.
READJUSTING THE BLADE CLEARANCE
The blades are optimally adjusted from the factory. However, after using the mower for a long period, if the cut is not clean, the blades need readjusting. The procedure is as follows:
1.Turn off the mower and remove the orange power key from its position on the circuit board.
2.Close and latch the battery box. Note: If the battery cover is not latched and the mower is not upright, the batteries can fall out, causing damage to the batteries or electric circuits.
3.Turn the mower over to expose the cutting bar.
4.Using a 10mm open end wrench, turn the hex bolt at one end of the cutting bar until the cutting bar and cylinder come into contact. Then back off the bolt about 1/8 turn, until the cutting bar and cylinder are no longer in contact.
5. Make the same adjustment at the other end of the cutting bar.
11
