Sun Microsystems A3500 manual 11x5 Module ID Switch Settings

2.1.2.2Module ID Switch

Ensure that the module IDs for the StorEdge D1000 disk arrays are set according to TABLE 2-1.

TABLE 2-11x5 Module ID Switch Settings

Disk array number		Module ID setting
5	(Top)	5
4		4
3		3
2		2
1	(Bottom)	1

2.1.2.3SCSI Jumper Cables and Terminators

All disk arrays in this configuration should have SCSI jumper cables between the middle SCSI connectors (IN/OUT-1 and IN/OUT-2) and a differential SCSI terminator in the far right SCSI connector (IN/OUT-2). This configuration is shown in FIGURE 2-15.

2-6Sun StorEdge A3500 Hardware Configuration Guide • September 1998