Manuals / Sun Microsystems / Computer Equipment / Server

Sun Microsystems T6320 manual Installing the Fabric Expansion Module, Installing the FEM

Models: T6320

1 22

Download 22 pages 12.42 Kb

Page 13

Installing the Fabric Expansion

C H A P T E R 2

Installing the Fabric Expansion

Module

This chapter describes how to install the Sun Blade T6320 XAUI Pass-Through Fabric Expansion Module in your system and verify that it has been installed correctly.

This chapter contains the following sections:

■“Installing the FEM” on page 5

■“Verifying the Hardware Installation” on page 6

Note – If you are installing the Sun Blade T6320 XAUI Pass-Through Fabric Expansion Module into a server module running Solaris 10 software, you must install the Solaris OS and patches before you install the hardware.

Installing the FEM

The following instructions describe the basic tasks required to install the FEM inside a blade server module.

▼To Install the FEM With the Power Off

1.Halt and power off your system.

2.Attach the adhesive copper strip of the antistatic wrist strap to the server module chassis. Wrap the other end twice around your wrist, with the adhesive side against your skin.

3.Perform an orderly shutdown of the server module

5

Image 13

Sun Microsystems T6320 Installing the Fabric Expansion Module, Installing the FEM, To Install the FEM With the Power Off

Contents

User’s Guide Sun Blade T6320 XAUI Pass Through Fabric Expansion ModuleSun Microsystems, Inc July 2008, Revision APage Contents Preface 1. Product Overview 1 Product Description Contents2. Installing the Fabric Expansion Module 5 Installing the FEM 3. Configuration Information A. SpecificationsUsing the SunVTS xnetlbtest xnetlbtest Test Requirements How This Document Is Organized PrefaceShell Prompts Using UNIX CommandsRelated Documentation Typographic Conventionshttp//docs.sun.com/app/docs/prod/blade.t6320 The documents are available atThird-Party Web Sites Support, and TrainingSun Welcomes Your Comments http//docs.sun.com/app/docsProduct Overview “Hardware and Software Requirements” on page “Features” on pageProduct Description “Product Description” on pageFIGURE 1-1 FEM Module for the Sun Blade T6320 Server Module TABLE 1-1 Minimum Hardware, Software and Firmware Versions Hardware and Software RequirementsFeatures Installing the FEM Installing the Fabric Expansion ModuleTo Install the FEM With the Power Off “Installing the FEM” on pageTo Verify the Hardware Installation Verifying the Hardware Installation1. Power on the system 4. Remove the server module from the system chassis2. List the network devices on your system To Reboot the Systemok boot -r Chapter 2 Installing the Fabric Expansion ModulePage Configuration Information Page Performance Specifications Specifications“Performance Specifications” on page “Physical Characteristics” on page “Power Requirements” on pagePower Requirements Physical CharacteristicsTABLE A-2 Physical Characteristics of the Express Module TABLE A-3 Environmental RequirementsSunVTS Diagnostic Software Diagnostic Software“SunVTS Diagnostic Software” on page “Find the SunVTS documentation at” on pagexnetlbtest Test Requirements Using the SunVTS xnetlbtesthttp//docs.sun.com/app/docs/prod/vts64#hic