To insure proper sanitation, all removable parts on the can opener should be detached and cleaned thoroughly in warm, sudsy water at regular intervals. Before cleaning, UNPLUGTHE CORDFROM OUTLET.The motor housing easily wipes clean using a damp cloth. Never immerse the motor housing in water.
Removing the Lid litter:
Lift up to slide out as pictured (E). Removing the Cutting Unit:
Raise can opener lever to its fullest upright position.
Push can opener lever to the right to remove it from the recessed area (F).
Drive Wheel
Wipe off drive wheel with a damp cloth. To thoroughly clean drive wheel, use small brush to remove accumulated dirt (G). Replacing the Cutting Unit
With can opener lever in raised position, place knob in recessed area. Push lever to the left to snap it into position (H).
