Sunbeam 4044, 4045 user manual Safety, Special Instructions

safety

•If the iron is not operating normally, disconnect from the power supply and have the iron serviced by an authorized service center.

•Your SUNBEAM® iron is designed to rest on the heel rest. Do not leave the iron unattended. Do not set the iron on an unprotected surface, even if it is on its heel rest.

SPECIAL INSTRUCTIONS

•This is a 1400-Watt appliance.To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.

•If an extension cord is absolutely necessary,

a 15-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.

For products purchased in the United States and Canada only

To reduce the risk of electrical shock, this appliance has a polarized plug (one blade is wider than the other). This plug fits a polarized outlet only one way; if the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat

this safety feature.

SAVE THESE

INSTRUCTIONS

iii