features

Using the Iron’s Special F eatur es

características

Cómo Usar las Funciones Especiales

SPRAY MIST®(modelos especiales solamente)
La función SPRAY MIST®humedece la tela para
ayudar a eliminar las arrugas de las telas gruesas y
asentar pliegues.
Para usar la función SPRAY MIST®:
Presione firmemente el botón SPRAY MIST®
.
SHOT OF STEAM®(modelos especiales solamente)
La función SHOT OF STEAM®proporciona una
descarga adicional de vapor para una penetración
profunda de arrugas difíciles de planchar. Esta función
se puede usar durante el planchado en seco o al vapor,
pero el depósito de agua debe estar lleno por lo menos
hasta 1/4 de su capacidad.
Para usar la función SHOT OF STEAM®:
1. Presione el botón SHOT OF STEAM®varias veces
para cebar la bomba.
2. Coloque la plancha sobre la arruga y presione
el botón SHOT OF STEAM®cada vez que desee
una descarga adicional de vapor. La función
SHOT OF STEAM®puede usarse continuamente
con una corta pausa entre descargas.
SPRAY MIST®(select models only)
The SPRAY MIST®feature dampens the fabric to aid
in removing wrinkles from heavy fabrics and for
setting creases.
To use the SPRAY MIST®feature:
Press the SPRAY MIST®button firmly.
SHOT OF STEAM®(select models only)
The SHOT OF STEAM®feature provides an extra
burst of steam for deep penetration of stubborn
wrinkles. You can use this feature while Dry or
Steam ironing, but the water reservoir must be
at least 1/4 full of water.
To use the SHOT OF STEAM®feature:
1. Press the SHOT OF STEAM®button
several times to prime the pump.
2. Place the iron on top of the wrinkle and
press the SHOT OF STEAM®button each
time you would like an extra burst of steam.
The SHOT OF STEAM®feature may be used
continuously with just a short pause
between shots.
7
7